LG S3WFBN Owner's Manual page 44

Operation
Symptoms
The appliance won't
operate.
The programme won't
start.
Smoke comes out when
the door is opened.
Full water supply tank is
empty after just one use.
Appliance makes a loud
vibrating noise on startup.
Styling times are taking
longer than estimated.
Appliance is moving
from left to right while
operating.
Possible Cause & Solution
Control panel has powered off due to inactivity.
• This is normal. Touch the Power button to turn the appliance on.
Cord is unplugged.
• Make sure cord is plugged securely into a working outlet.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset breaker.
The appliance should be on a dedicated branch circuit.
Appliance is not connected to 220 V socket.
• Make sure the cord is plugged into a grounded socket rated for this
appliance.
Start/Pause was not touched after the programme was set.
• Touch Start.
Programme is producing steam.
• There may be a period of inactivity while steam is produced.
Control panel is locked.
• Disable the Control Lock function and touch Start.
Door is opened during operation.
• It is normal for steam or hot air to escape if the door is opened during
operation.
Appliance is being used for the first time.
• A larger amount of water is needed the first time the appliance is used
to fill the empty reservoir.
Moving hanger is balancing load before operation.
• This is normal at the beginning of the programme. If the noise increases
or continues for a long time, call for service.
Clothes were extremely wet when loaded.
• Styling times may be longer for very wet or bulky clothing. Dry damp
clothes before putting them in the appliance. The appliance stops
automatically when clothes are dry.
Floor under appliance is not level or is not sturdy enough to support
the weight of the appliance without flexing.
• Install the appliance where the floor is level and sturdy. Compensate for
any slight unevenness in the floor with the levelling legs.
EN
43