LG S3WFBN Owner's Manual page 17

Installing on carpeting
Follow these instructions when installing the
appliance on carpeting.
WARNING
• The appliance is heavy. Two or more people
are necessary to install the rear levelling feet
and carpet spikes. Failure to do so can result in
back injury or other injury.
• Keep the appliance upright when moving and
installing it. If you lay the appliance on its side,
refrigerant may leak and cause the appliance to
malfunction.
1
Move the appliance into its final location using
the wheels at the bottom of the appliance..
2
Install the two rear levelling feet at the rear
bottom of the appliance.
• Tip the appliance, do not lay it down, to
install the levelling feet.
3
Level the unit following the instructions in
Levelling the appliance.
4
Install the four carpet spikes on the ends of
the levelling feet, with the shorter, octagonal
faces toward the front.
front
16
WARNING
• Take care when handling the carpet spikes.
They are designed to pierce through the carpet
backing and pad and are very sharp.
• Keep fingers and hands out from under the
spikes when setting the unit in place to avoid
personal injury or product damage.
5
Level the appliance once more after installing
the spikes.
• If the carpet has very deep pile or padding,
the front feet may need to be extended
slightly to install the drip tray.
Consider followings after installing the appliance
on carpeting.
• Be sure to check and empty the drip tray often.
• Do not open the unit during operation to avoid
condensation forming on carpet surface, which
may result in surface mold or mildew.
• Keep the bottom of the cabinet dry when filling
or emptying water tanks. Keep the outside of
the water tanks clean and dry to discourage
growth of mold or mildew.
EN