Sony BRAVIA KLV-32T550A User Manual page 22

Manual Programme
Preset
FM Radio Set-up
(only in FM Radio
mode)
22
GB
Before selecting "Label"/"AFT"/"Skip"/"Colour System"/"Signal Booster", press
PROG +/- to select the programme number with the channel. You cannot select a
programme number that is set to "Skip" (page 22).
Programme/TV System/VHF or UHF
Presets programme channels manually.
1
Select "Programme", then press
F f
2
Press / to select the programme number you want to manually tune
(if tuning a VCR, select channel 000), then press RETURN.
F f
3
Press / to select "TV System", then press
F f
4
Press / to select your TV broadcast systems, then press
F f
5
Press / to go to the frequency range indication ("VHF Low", "VHF High" or
"UHF"), then press
6
Tune the channels as follows:
G g
/
Press to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of "Programme Labels" (page 21).
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality. You can adjust the fine tuning
over a range of -15 to +15. When "On" is selected, the fine tuning is performed
automatically.
Skip
Skips unused channels when you press PROG +/- to select channels. (You can still select
a skipped channel using the number buttons.)
Colour System
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43" or
"PAL60") according to the channel.
Signal Booster (Intelligent Signal Booster)
Improves the picture quality if the TV signal is too strong or weak.
F f
Press / to select either "Off" if the signal is too strong (picture distorted; picture with
lines; signal interference) or "Auto" if the signal is weak (snowy picture), then press
Signal Level
Displays the signal level for programme currently being watched.
red amber green
(weak) (average) (good)
Preset up to nine FM radio stations. You can manually preset each FM radio station that
can be received in your area and then store the radio frequency of the desired FM radio
stations.
F f
1
Press / to select the desired FM radio station position, then press
F f
2
Press / to search the FM radio stations. Searching stops automatically when a
station is tuned in. If the station has a noisy sound, you may be able to improve the
sound quality by pressing
3
You may edit the FM radio station label. Press
characters for the label, then press
4
Repeat steps 1 to 3 to preset other FM radio stations.
• To enable this feature, access to FM Radio mode by using MENU (page 15), then preset
your desired FM radio stations according to the steps mentioned above.
.
.
G g
/ . Press twice to store the FM radio station.
F
.
.
.
G g
/
.
.
f
/ to select alphanumeric
.