Cycle Modifiers - LG DL 730 E Series Owner's Manual

Cycle Modifiers

About Modifier Buttons
Each cycle has default settings that are selected
automatically. Customize these settings using the
cycle modifier buttons. Repeatedly press the
button for the desired modifier until the indicator
light for the desired setting is lit. Not every option
is available with every cycle. If a modifier is not
available, the button chimes twice and the setting
does not change.
Dry Level
Use this button to select the dryness level for the
cycle. Press the Dry Level button repeatedly to
scroll through available settings.
• The appliance will automatically adjust the cycle
time according to the selected dryness level.
Selecting More or Very will increase the cycle
time, while Less or Damp will decrease the cycle
time.
• Use a Less or Damp setting for items that you
wish to iron.
Temp.
Use this button to adjust the temperature setting.
This allows precise care of fabrics and garments.
Press the Temp. button repeatedly to scroll
through available settings.
Time Dry
Use this button to manually select the drying time,
from 20 to 60 minutes, in 10-minute increments.
• Use this for small loads or to remove wrinkles.
• Default Temperature is High and can be
adjusted. The Dry Level cannot be adjusted.
• This option can be used together with the
Wrinkle Care option.
• Use the More Time / Less Time buttons to add
or reduce the drying time in 1-minute
increments.
Signal
The appliance plays a melody when the drying
cycle is finished and the buttons make a sound
when pressed.
• To turn the sounds on/off, press the Signal
button. Alert sounds will still be audible.
OPERATION 41