System Utilities - Dell PowerEdge T710 Deployment Manual

Deploying uefi-aware operating systems on dell poweredge servers
Hide thumbs Also See for PowerEdge T710:
Table of Contents

Advertisement

Option 
Change Boot Order 
One‐Time Boot From File 
System Utilities 
The System Utilities menu can be entered from the front page.  The following options are available from this 
menu: 
Option 
System Setup 
System Services 
BIOS Boot Manager 
Reboot System 
 
 
this menu. 
Allows the boot priority of the boot options to be modified. 
Provides a menu similar to that of Add Boot Option, but does not add the 
boot option.  Instead, it attempts to boot to the selected file or device. 
Description 
Enters the System Setup Utility.  This can also be entered by pressing <F2> 
during the pre‐boot phase of system startup. 
Enters System Services.   This can also be entered by pressing <F10> 
during the pre‐boot phase of system startup. 
Enters the BIOS Boot Manager to provide the ability to boot to a non‐UEFI 
aware operating system while the Boot Mode is set to UEFI.  This is the 
same Boot Manager that would be entered by pressing <F11> during the 
pre‐boot phase of system startup if the Boot Mode is set to BIOS. 
Reboots system. 
Page 6 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r410

Table of Contents