Table of Contents
Advertisement
MAIN
8
1
Power Button
Power (DPMS)
2
Indicator
MENU Button
3
4
OSD Buttons
5
AUTO/SELECT Button
6
SOURCE Button
7
• The unit that receives the signal from the remote controller.
8
Main Power Switch
CONTROLS LOCKED/UNLOCKED :MENU and
Use this button to lock/unlock OSD screen adjustment.
(Activated when pressed together longer than 5 seconds.)
OPERATING INSTRUCTIONS
Front Control Panel
6
Press the button to turn on the power. Press the button again to turn it off.
•
• This Indicator lights up green when the display operates normally. If the display is in
DPM (Energy Saving) mode, this indicator color changes to amber.
Use this button toshow/hide the OSD(on Screen Display) menu screen.
•
Use the button to select an icon or adjust the setting in the OSD screen .
•
• Use this button to directly control
brightness and contrast of the PC signal
(DSUB/DVI).
Adjust the volume
[For DSUB signal]
• Select the icon to adjust on the OSD screen.
• If you press the [AUTO/SELECT] button,
automatic screen adjustment will be started.
SOURCE
• Use this button to select an input signal.
• DVI DIGITAL: DVI digital signal
• DSUB ANALOG: 15-pin D-sub analog signal
• VIDEO1 (CVBS): Composite video
• VIDEO2 (S-Video): S-video
• DVD(Y, Cb, Cr): DVD
• HDTV(Y, Pb, Pr): HD television
• Use this button to turn on/off the monitor.
• OSD is locked
- 7 -
3
4
[Other signals that DSUB]
• The current signal and mode information will
be displayed.
AUTO/SELECT
• OSD is unlocked.
7
2
5
1
Advertisement
Table of Contents
