DCL VT3600 Installation Manual page 8

Network
4G
Positioning
GNSS
Power Related
Power supply
Power consumption
+44 (0) 124 545 9700
For Latin America:
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
LTE TDD: B40
WCDMA: B1/B2/B5/B8
GSM: B2/B3/B5/B8
Warning: Industrial SIM cards (MP2) are required
We are not responsible for any problems caused
as a result of using ordinary SIM cards.
Supported
GPS L1 1575.42MHz
SBAS: WAAS, EGNOS, MSAS, GAGAN
12V and 24V vehicles (self-adaptive)
• In standby mode: 13.5V@5.67mA, 27V@3.4mA
• In sleep mode (4G and MCU powered): 13.5V@59~118mA,
27V@29~53mA
• Typical power consumption (with dual SD cards installed
and SIM card for dialling): about 4.79W
• Full-load power consumption (with dual SD cards installed,
SIM card for dialling, Wi-Fi turned on, IPC and AHD
connected, and infrared lights turned on): about 6.78W
* The above data is test data obtained in a specific
environment in a laboratory, and may vary with individual
products, service environments, and testing methods.
enquiries@directcommercial.co.uk
VT3600 Installation Guide | 08
www.directcommercial.co.uk