Jumper Setting - Biostar Hi-Fi H87S3E Setup Manual

2.6 Jumper Setting

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is "close", if not, that means the jumper is "open".
Pin opened
JCMOS1: Clear CMOS Jumper
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
Hi-Fi H87S3E / Hi-Fi B85S3E
Pin closed Pin1-2 closed
Normal Operation (default).
1 3
Pin 1-2 Close:
1 3
Pin 2-3 Close:
Clear CMOS data.
13