Biostar GAMING Z97W Setup Manual page 37

Table of Contents

Advertisement

GAMING COMMANDER
Overview:
1.
Volume Down (-): Decrease system volume
2.
Volume Up (+): Increase system volume
3.
XLouder On/Off: Turn on or off XLouder function
* XLouder can boost the microphone volume, and it is only available when turning on
GAMING COMMANDER.
4.
Mute: Mute the system volume
5.
Line Out: Connect a headphone or external speaker
6.
MIX On/Off: Turn on or off GAMING COMMANDER
MIX On: GAMING COMMANDER is ON and its audio utility will auto run in system tray.
MIX Off: GAMING COMMANDER is OFF and the audio function will be switched to
onboard audio codec.
7.
MIC In: Connect a microphone
8.
CPU Temp. Indicator: The LED lights in three different colors to indicate the CPU Temp.
Green: under 70°C
Yellow: between 70-90°C
RED: above 90°C
9.
Front Audio Connector
10. USB Connector
11. GAMING PANEL Connector
12. Diagnose LEDs (CPU/VGA/DDR): After startup process has been completed
successfully, the LEDs will light. If an error is detected during the startup process, the LED
will be OFF.
GAMING Z97W
35

Advertisement

Table of Contents
loading

Table of Contents