Table of Contents
Advertisement
* The display switches off if receiving signals but you
don't press a key on the remote control during a 4
hour period.
* The display switches off if not receiving signals nor a
remote control command for 10 minutes.
* If you use the device as a monitor or use a digital
receiver to watch programme (a Set-Top Box - STB)
and you do not use the remote control of the display,
you should deactivate this automatic switch off, to set
the value to 0.
11.5
General Settings
USB Keyboard Settings
Set the keyboard layout for installed USB keyboard
Settings > General settings > USB keyboard
settings.
Connect the USB keyboard to one of the USB
connections on this display. When the display
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection.
Home or Shop
Select the location of your display
Settings > General settings > Location.
Select Shop, the picture style is switched back
to Vivid, and can adjust shop settings.
Shop mode is for in-store promotion.
Shop Setup
Adjust shop settings
Settings > General settings > Shop setup.
If the display is set to Shop, you can set the
availablility of a specific demo for in store use.
Adjust Picture and audio
Settings > General settings > Shop setup >
Picture and audio.
Select Optimized for shop or custom for picture and
audio settings.
Set Logos and banner
Settings > General settings > Shop setup >
Logos and banner.
Set to display Feature logos and Promotional banner.
Demo Me autostart and Ambilight Demo autostart
Settings > General settings > Shop setup >
Demo Me autostart / Ambilight Demo autostart.
Turn On/Off the Demo Me or Ambilight Demo
autostart.
HDMI Ultra HD
It can display Ultra HD signals. Some devices -
connected with HDMI - do not recognise a display
with Ultra HD and might not work correctly or show
distorted picture or sound.
To avoid the malfunctioning of such a device, you can
adjust HDMI Ultra HD setting when the display is in
the HDMI source. Recommended setting for legacy
device is Standard.
Set the signal quality for each HDMI connectors
Settings > General settings > HDMI Ultra
HD > HDMI (port) > Standard, Optimal, or Optimal
(Auto Game).
To change the settings, switch to the HDMI source
first. Select Optimal to enable the highest quality
HDMI signal for 4K Ultra HD and HDR content (4K60
4:4:4, 4K60 10 or 12-bit HDR).
• The setting Optimal allows maximum up to Ultra HD
(50 Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0
signals.
• The setting Standard allows maximum up to Ultra
HD (50 Hz or 60Hz) YCbCr 4:2:0 signals.
Maximum supported video timing format for HDMI
Ultra HD options:
• Resolution: 3840 x 2160
• Frame rate (Hz): 50Hz, 59.94Hz, 60Hz
• Video data sub-sampling (bit-depth)
- 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB
4:4:4*
- 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
- 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
* Supported only when HDMI Ultra HD is set to
Optimal.
Select Standard if the picture or sound are distorted.
• Set Optimal (Auto Game) to enable the display to
support the HDMI Variable Refresh Rate* video (on
some models only and the Picture style setting is not
Monitor). The display will automatically set
Picture/Sound style to Game whenever it is informed
by the HDMI device connected to the display.
35
Advertisement
Table of Contents
