Toshiba BDX5300KB Owner's Manual page 18

Notes:
- If set [Disc Auto Playback] to [Off], after you
insert the disc that contains the upgraded
information to upgrade system, you have to start
upgrade from this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not
complete).
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB flash
drive, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
SW upgrade by Internet introduction
There are two modes to upgrade via
internet: Automatic Mode and Interactive
Mode.
Automatic Mode:
The player will check the internet whether it
is connected automatically when powered on.
If connected, player will try to connect the
Toshiba server to check if there is new
firmware for the player.
If yes, the player will pop up a message on
the screen to inform you that an upgrading
firmware is available on the internet. You can
choose whether to upgrade or not.
New software found! Upgrade?
Cancel
Interactive Mode:
You can also do Internet upgrade via setup
menu.
You should make sure that the player is
connected to the internet first.
Press SETUP button of the remote control,
then choose "System -> Upgrade ->
Internet" and press OK button. Then the
player will connect the Toshiba server to
check if there is new firmware for the player.
Connecting to the server. Please wait!
If yes, the player will pop up a message on
the screen and you can choose whether to
upgrade or not.
18
If no, the player will pop up a message on
the screen to inform you that there is no new
firmware for the player.
Remark :
If you choose to upgrade the new FW ,
1.The player will begin to download the
upgrade file and pop up a message to show
the progress.
2. When download is finished, the player will
pop up a message for you, and you can choose
whether to proceed with the upgrading or not.
If you choose to upgrade, the player will begin
to upgrade, and pop up a message to show the
Upgrade progress. When upgrade is done, the player
will restart.
Attention! Do NOT cut off the power supply
when the firmware is upgrading! If not, the
OK Start
player might become unworkable.
•
Upgrade
New software found! Upgrade?
Cancel
Current version is latest. Update is not
available.
Cancel
Downloading upgrade file.Please wait!
Cancel
[External Memory]
External Memory would be used in BD-
Live function. When you plug in the
TM
USB flash drive which has at least 1GB
free space to play BD-Live
the Blu-ray Disc system would make a
TM
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
General Setting
System Screen Save
Information
Language Disc Auto Playback
CEC
Playback
Free size is : 0MB
Disc Auto Upgrade
Security
Load Default
Network
Move cursor key to select menu option
then use "OK " key to select
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
Upgrade
Start
OK
Upgrade
Upgrade
function,
TM
Off
On
On
On
More...
Erase
RETURN Return