Advertisement
Available languages
Available languages
6. Select the proper BIOS file, and a message asking
if you are sure to flash the BIOS file. Click "Yes" to
start updating BIOS.
7. A dialog pops out after BIOS flash is completed,
asking you to restart the system. Press the <Y> key
to restart system.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS
setup.
After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>
function to load Optimized Defaults, and select <Save Changes and Reset> to restart the
computer. Then the BIOS Update is completed.
22 | Chapter 3: UEFI BIOS & Software
Advertisement
Chapters
