Controlling Volume And Muting Sound; Equalizer Settings; Balance; Headphone Volume - Toshiba 40KV700B Owner's Manual

Controlling Volume and Muting Sound

Volume
Press V+ or V- to adjust the volume.
Sound Mute
Press " " once to turn the sound off and again to
cancel.

Equalizer Settings

You can customize current sound mode settings.
Select the appropriate mode in accordance with the
installation location of the TV and adjust the equalizer
on-screen as desired.
• Select the SOUND menu.
• Press Up or Down to highlight Equalizer, and then
press OK.
• Press Left or Right button to change the preset.
In equalizer menu, the preset can be changed to
Music , Movie , Speech , Flat , Classic and User .
• Select the desired frequency by pressing
or Down button and increase or decrease the
frequency gain by pressing Left or Right button.
• Press the MENU button to return to the previous
menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .
00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 22 00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd 22
General Sound Controls
You can set sound preferences of your TV.
Up
English - 22 -

Balance

This setting is used for emphasizing left or right
speaker balance.
• Press Up or Down button to select Balance.
• Press Left or Right button to change the level of
the balance. Balance level can be adjusted between
-32 and + 32.

Headphone Volume

This setting is used to set the sound output when
headphones are connected.
• Press Up or Down button to select Headphone .
Press Right button to view the headphone menu.
• Press Up or Down button to select Volume . Press
Right button to increase headphone volume level.
Press Left button to decrease headphone volume
level. Headphone volume level can be adjusted
between 0 and 63 .

Sound Mode

This setting is used to select the sound mode of your
television.
• Press Up or Down button to select Sound Mode .
• Using Left or Right button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the selected
channel supports that mode.

AVL

Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch, an
ATV channel, or an external input. Using the AVL
feature reduces these volume differences.
• In the SOUND menu, press Up or Down to highlight
AVL.
• Press Left or Right button to set AVL as on or off..
19.10.2010 08:34:03 19.10.2010 08:34:03