Table of Contents
Advertisement
3-8
Installing the PCI Expansion Card
• The PCI riser assembly does not include a riser card or any cabling as standard. To install
a PCI card, a riser card must be installed.
Follow these instructions to install the PCI Expansion card:
1.
Remove the three screw on the riser bracket to the system.
2.
Lift up the coolant module with the riser bracket out of system.
3.
Remove the two screws securing the riser bracket to the system.
4.
Lift up the riser bracket out of system.
5.
Remove the PCI screw and bracket.
6.
Remove the side bracket
7.
Align the PCIe card to the riser guide slot and push in the direction of the arrow until the PCIe card
sits in the PCI card connector.
8.
Secure the PCIe card with a screw.
9.
Install the side bracket to the riser bracket.
10.
Reverse steps 1 - 9 to install the two riser brackets back into the system.
1
1
4
3
System Hardware Installation
- 40 -
2
Advertisement
Table of Contents
