TM-L100
User's Manual
Printout is Faint
If your print out is faint or banding appears as shown below, the thermal print head may be stained badly. Clean
the thermal print head and check that the problem is solved.
"Thermal Head" on page 33
Cannot Print
If you cannot print even though an error has not occurred, perform a self-test to check if printing is possible.
A
Close the roll paper cover.
B
While pressing the
starts.)
After printing the current print status, a continuing self-test guidance is printed, and the
flashes.
C
Briefly press the
the built-in character set.
After "*** completed ***" is printed, the printer is reset and switches to standard mode.
Troubleshooting
Feed button, turn on the printer. (Hold down the
Feed button (less than one second) to continue the self-test. The printer prints using
42
Feed button until printing
Paper LED