Table of Contents
Advertisement
Using the "Panasonic SmartApp+"
After initial setting is completed, you can use the app.
Preparing to use the "Remote" function
You need to prepare the washing machine before going out.
1
2
On
3
Hold
5 sec.
NOTE
To cancel the remote control mode → turn the power off.
z
When there is no remote control from the app, the remote control mode is released
z
after 23 hours. During remote control mode, all buttons on the appliance (except
are disabled. You can only control the washing machine from the app. After 23 hours,
the normal screen is displayed and the remote control is disable.
To check the communication status with the lamp on control panel.
Light up
Blinking
Off
Lights
(On)
After 10 min.
Approx. 2 sec.
Communicatable (Connected)
Trying to communicate
(Connecting to server)
Not connected
NOTE
Close the lid completely.
z
Make sure there is still detergent/
z
softener in Auto Dose tank.
All other indications
turn off, except:
■ Lamp position
)
39
Advertisement
Table of Contents
