Conditional Access - Toshiba 32BV801B User Manual

Conditional Access

The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
• Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the
CAM.
• Press the MENU button to display the main menu and
use the " " or " " button to highlight the Conditional
Access line and press the OK button:
Important:
• Switch off the TV and unplug from the mains.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the IDTV menu,
Conditional Access then pressing the "OK" button.
(CAM set up menu is not displayed when it is not
required.)
• To see the viewing contract information: enter IDTV;
press the " MENU " button, then highlight Conditional
Access and press the " OK " button.
• When no module is inserted, "No Conditional
Access module detected" message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
Note: Insert or remove the CI module only when the TV
is switched off or in standby mode.
32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 35 32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 35
Conditional Access
English - 35 -
03.10.2011 18:53:09 03.10.2011 18:53:09