Installation And Important Information - Toshiba 42YL863B Owner's Manual

INSTALLING YOUR TV

Installation and important information

Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
This is not a sign of a malfunction.
Make sure the television is located in a position where
it cannot be pushed or hit by objects, as pressure will
break or damage the screen. Also, please be certain
that small items cannot be inserted into slots or
openings in the case.
When using a Wall Bracket
For 46WL, 55WL, 46YL and 55YL series, always use the
screws recommended by the wall mount
manufacturer.
• Interoperability with MHL devices of other manufacturers is not guaranteed.
• Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL
source is connected to the TV.
- No picture or sound
- Some of the functions do not work by remote operation from the TV
• If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.
• Do not disconnect the the power plug when the TV is active and the MHL device is being connected.
• Do not disconnect the the power plug when the TV is in standby mode and the MHL device is being connected.
Where to install
When using MHL (Mobile High-definition Link)
Fixing strap
Sturdy tie (as short as possible)
'P' Clip
Stand style is dependent on model
6
Fixing strap
Stand clip
Screw
(supplied)
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)