Toshiba TY-SBX1020 - Bluetooth Soundbar Manual

Placement and mounting

Wall mounting

Note

• Installation must be carried out by qualified personnel. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer's responsibility to verify that the wall will safely support the total load of the Main Unit and wall brackets.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this operation manual for future reference.
• Use an electronic stud finder to check the wall type before drilling and mounting.

1. Remove the screws from the Main Unit.
   
2. Attach the wall brackets to the Main Unit with the screws removed from the Main Unit.
   
3. Drill 2 parallel holes (Ø 3 - 8 mm each according to wall type) in the wall.
   The distance between the holes should be 640 mm.
   
4. Firmly fix 1 dowel into each hole in the wall if necessary.
   
5. Leave a 5 mm gap between the wall and the screw's head. Lift the Main Unit with the attached wall brackets over the heads of the screws and slot into place.
   

Power Supply

When using AC power supply

1. Insert the supply plug of the attached power cord fully into AC Power Plug on the back.
2. Insert the power plug into an AC outlet.

Identifying the Parts

Terminal

Buttons and indicators

LED indicators		Indicates the current mode. Indicator color: STANDBY: Red AUX: Green BT: Blue OPTICAL: Orange COAXIAL: Orange (flash) HDMI ARC: White
	Power button	Switch the unit between ON and STANDBY mode.
	Function button	Select the play function.
EQ	Equalizer button	Select a preset sound effect.
- / +	- / + Volume / button	Increase/decrease the volume level.

Remote Control

	Power button	Switch the unit between ON and STANDBY mode.
	Mute button	Mute or resume the sound.
	Function buttons	Select the play function.
	Volume+/- button	Increase/decrease the volume level.
	EQ buttons	Select a preset sound effect.
	Play/Pause/ Pairing button	Play/pause playback in Bluetooth mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
	Fast forward/ backward button	Skip to previous/next track in Bluetooth mode.

Information:

• Remove the protective tab to activate the remote control battery before use.
• Use a CR2025 lithium battery for the remote control. When replacing the battery, remove it and place a CR2025 lithium battery into the battery tray with correct polarity (+/-) as engraved on the remote control rear panel. There is a risk of injury due to fire, explosion or leakage if the battery is not replaced, used, handled or disposed of properly. Dispose of the used battery immediately as required by local regulations. Do not disassemble, charge, crush the battery or expose it to fire or high temperature.

Basic Operation

Turning on/off the power

Press Power button.
When the power is on, the standby indicator (red) will go off and one of the function indicators will light up.
When the power is off, the standby indicator (red) will light up.

Information:

• Auto power on
  The unit turns on automatically under the following conditions:
  • if you turn on the TV and its HDMI ARC port connected to the unit with a HDMI cable.
  • if you start playing a music on the audio player connected to the unit with a 3.5mm to 3.5mm audio cable.
• Auto power off
  The unit turns off automatically under the following conditions:
  • if you turn off the TV connected to the unit with a HDMI cable.
  • if no operation is done or no signal comes from the connected device for 15 minutes.

Adjusting the volume

Press Volume+/- button.
Press Mute buttton only for remote control.

Select a Mode

Press the Function button repeatedly on the unit or the AUX, HDMI ARC, OPTICAL, COAXIAL or BT(Bluetooth) button on the remote control to select the desired mode.

Select a Preset Sound Effect

While playing, press the EQ button on the unit or the NEWS, MOVIE or MUSIC button on the remote control to select the desired sound effect.

AUX / HDMI ARC / OPTICAL / COAXIAL Operation

1. Ensure that the unit is connected to the TV or audio device.
2. Press the Function button repeatedly on the unit or the AUX, HDMI ARC, COAXIAL or OPTICAL button on the remote control to select the desired mode.

Information:

• Operate your audio device directly for playback features.

Bluetooth® Operation

Pairing:

1. Press the Function button repeatedly on the unit or the BT button on the remote control to select Bluetooth mode. The Blue indicator will light flash.
2. The system has entered pairing mode. Press and hold the "/ PAIR"button on the remote control. The Blue indicator will flash rapidly and the unit has entered pairing mode.
3. Activate your Bluetooth® device and select the search mode. "TY-SBX1020" will appear on your Bluetooth device list.
4. Select "TY-SBX1020" in the pairing list. After the "Pairing sound" prompt, the unit is successfully connected and the Blue indicator will light up solidly.

Information:

• Enter "0000" for the password if necessary.

Playing Bluetooth® Music:

1. Pair your device with the player.
2. Play music via your device (by pressing the /PAIR, , or button.

Specifications

Bluetooth® section

General

The specifications may be changed without prior notice to improve product performance. The images included in this guide may differ from the actual image and may change without notice.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Toshiba TY-SBX1020 - Bluetooth Soundbar Manual