Scheduling The Washing Time - Beko BDIN38440 User Manual

Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Functions in Settings Menu
(depends on the model)
Under the settings menu of your product,
there are some additional functions that
depend on the model.
To access these functions, press and hold
the Menu key for 3 seconds. Press <- and
+> keys to move to the desired function or
setting.
In some models pressing the Menu
key only for once will allow you to enter
the Settings menu.
Use the selection key to change the
desired function or setting and switch off
your machine to save the Settings.
Submenu Functions:
(depends on the model)
SelfDry Function Off/On
Tablet Detergent Function Off/On
EverClean Function Off/On
IonGuard Function Off/On

Scheduling the washing time

Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 24 hours.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
33/EN