Advertisement
How to use the dishwasher
1. After loading the dishwasher, close
the door properly and open the water
supply tap.
2. The dishwasher switches on
automatically as soon as the
programme selector knob is turned.
One of the programme indicator
lamps will switch on.
3. Turn the selector knob to select the
desired programme. The corresponding
indicator lamp lights up. If required,
select options (if supplied).
4. Press the Start button to start the
selected programme. The Start
indicator lamp will light up. Once set,
the programmed data cannot be altered
by turning the programme selector knob.
Note: once the Start button has been
pressed, the dishwasher memorises
the last programme selected. This
information remains in the memory even
during interruption of the power supply.
To change the selected
programme, press the Start
button for about 5 seconds.
The Start indicator lamp will switch
off. Select a new programme and
press the Start button.
Note: If the dishwasher is switched
off during a wash programme,
when switched on again it will resume
the wash cycle from where it was
interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
5. To indicate the end of the programme,
the Start indicator lamp switches off
and the End indicator lamp (if fitted)
lights up (for about 30 min.).
6. Once the Start indicator lamp has
switched off, turn the programme
selector knob to the initial position
to switch off the dishwasher. All the
indicator lamps switch off.
7. Open the door (warning: beware of hot
steam). Unload the lower rack before
the upper one. Close the water tap.
Upper rack
B
Half load / Multizone:
If the upper rack only is to be loaded, place
the cutlery basket (B) in the upper rack.
Rack height adjustment:
(The dishwasher is delivered with the upper
rack in the top position).
The rack height can also be changed
when loaded.
•
To lower: pull out the two side
handles and gently lower the rack.
Please read the user instructions carefully.
Upper and lower rack
•
To raise: pull up the two side handles
until the rack clicks into place.
•
The rack must be level on both
sides.
Crockery holders:
•
Down: cups and long-stemmed glasses.
•
Up: plates.
3
"Flex
": multi-purpose support
•
To be used, for example, for long-
handled utensils (arrange knives
with the blade facing downwards),
cups and glasses.
•
May be used in three different
positions (see also "Dishwasher
loading instructions" on Page 4).
1. Upon the left-hand side of the rack.
2. Upside-down, towards the centre of
the rack.
3. Upside-down, towards the left side.
Glass holder:
Lower rack
A
A
C
Half load / Multizone:
Loading the lower rack only gives greater
washing power, especially for plates and
saucepans.
Plate holders:
•
(A) may be lowered to increase
available space.
Cutlery basket:
The cutlery basket can be removed to
increase (B + C) available space.
•
It can be placed on the upper rack (B)
when the Half load/Multizone function
is selected.
• Some models are provided with a
grid (D) that can be fitted onto the
cutlery basket.
B
D
C
Advertisement
