Operation Controls And Functions; Front Panel - Prestel CP-RS8 User Manual

5. Operation Controls and Functions

5.1 Front Panel

1 2 3
No. Name
IR Learning
1 Window &
LED (Yellow)
IR/Serial
2 LEDs
(Yellow)
Relay LEDs
3
(Yellow)
I/O LEDs
4
(Yellow)
Power LED
5
(Red)
LAN LED
6
(Green)
STA LED
7
(Blue)
TX LEDs
8
(Yellow)
RX LEDs
9
(Yellow)
4 5 6 7
Function Description
The yellow LED blinks when the IR wave is received;
If not, the LED is off.
8 LEDs, each of which blinks in yellow to indicate that the
corresponding IR/serial port is transmitting data; If not, the
LED is off.
8 LEDs, each of which illuminates in yellow to indicate that
the corresponding relay port is closed; If not, the LED is off.
8 LEDs, each of which blinks in yellow to indicate that the
1/5
3 4
corresponding I/O port has got signal level fluctuation; If not,
the LED is off.
The red LED illuminates when the device is powered on.
The green LED illuminates when the Controller connects
to the network, blinks when it uses network protocols for
data communication.
The blue LED illuminates when the device functions
properly after booting, blinking for factory resetting.
8 LEDs, each of which blinks when the corresponding
TX port is transmitting data; If not, the LED is off.
8 LEDs, each of which blinks when the corresponding
RX port is receiving data; If not, the LED is off.
-4-
9
8