Connection Instruction - Xiaomi Redmi Pad SE Quick Start Manual

exposition when in use with an accessory without metallic component. It's
necessary to avoid its use as body accessory since the compliance with the
radiofrequency exposition of the accessories close to the body and metallic
components was not tested, nor certified.
FCC Note
Alterations or modifications not expressly approved executed by the part
responsible for the normative compliance may annul the user authority to
operate the equipment.
Shielded cables might be utilized with this unit to guarantee the
compliance with B-Class FCC thresholds.
Electronic tag
This device has an electronic tag with the certificate information.
To check it, access Settings > About tablet > Certification or go to Settings
and type "Certification" into the search bar.
Certification Information (highest SAR)
SAR Limit 10 g: 2,0 W/kg
SAR: Body: 0,367 W/kg (distance 0 mm).
SAR Limit 1 g: 1,6 W/Kg
Body: 0,94 W/Kg (distance 0 mm).
Model: 23073RPBFL
2307 indicates that this product launch will be after 202307.
NOM
THIS DEVICE OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS:
a) This equipment or device might not cause harmful interference.
b) This equipment or device might accept any kind of interference, including
one that may cause a non-expected operation.

CONNECTION INSTRUCTION:

1. To connect your mobile tablet to the electric energy feed and recharge
the internal battery, utilize only your battery charger provided with the
equipment.
2. Connect the USB cable in the tablet's USB port.
3. Connect the USB cable in the battery charger's USB port.
4. Connect the charger in the AC power socket (100- 240 V~).
5. To disconnect the charger after having charged the battery, take and
remove the charger firmly from AC power socket, do not remove it by
the cable.