Fcc Regulations - Xiaomi Redmi Pad SE Quick Start Manual

and other functions according to the ratified in the standard IEEE 802.11
specifications) may vary according to regional availability and compatibility
of the local net. This function might be added using OTA, whenever is
correspondent.
Please ensure the used power adapters are compliant with applicable
country regulations and international and regional safety standards.
Frequency range and power
This tablet offers the following frequency ranges, in EU zones and only on the
following maximum radiofrequency ranges:
Bluetooth: 20 dBm
2,4 GHz Wi-Fi range: 20 dBm
5 GHz Wi-Fi: 5150 to 5250 MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to
5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm

FCC Regulations

This tablet complies with Part 15 of the Federal Communications
Commission (FCC) rules. Functioning is subject to the following conditions:
(1) This device shall not cause harmful interferences and (2) this device must
accept all interferences received, included those that might cause a non-
expected functioning.
This tablet was tested and noted to comply with the limits stipulated to a
digital device Class-B, according to established by Part 15 of FCC rules. These
limits were established to provide a reasonable protection against harmful
interferences in a residential installation.
This equipment may generate, use and irradiate radiofrequency energy. If
it were not installed, nor used according to the instructions, may cause a
harmful interference on the radio communications.
Nevertheless, there is no guarantee that it does not produce interference in
an installation in particular. If this equipment causes harmful interferences in
the reception of radio or television, which may be determined upon turning
the equipment off and on; it is recommended to the user to try excluding the
interference through one or some of the following measures:
- Redirect or displace the receiving antenna.
- Raise the distance of separation between the equipment and receptor.
- Connect the equipment to a power socket in a different circuit than of the
receptor's connection.
- To obtain assistance consult the supplier or an expert radio or television
technician.
Radiofrequency exposition information (SAR)
This device complies with the Government specifications related to
exposition to radio waves. This device is designed and manufactured in view
of not exceeding emission limits related to radiofrequency energy exposition
(RF). Standard exposition to wireless devices employs a measure unit known
as specific absorption rate (SAR).
SAR limit established by FCC is 1,6 W/kg. This device use was tested next
to the body, and complies with the FCC regulation for radiofrequency