Page 2
Content English Traditional Chinese Japanese Korean...
Page 3
LED Button LED Button Simply connect to wired Fighting Stick. •Each Wingman FGC can only connect to a single Fighting Stick device. Wingman FGC supports most of the accessories that are compatible with original factory speci cations. To expand the number of supported accessories, rmware will be updated irregularly.
Not include Turbo, Remap, and Macro functions. If players need these functions, you can download another rmware version (Standard) from the download on the Brook o cial website. https://www.brookaccessory.com/download/PS5/ • Standard: Includes Turbo / Remap / Macro functions / Blue LED...
Step 1. Open “User Profile Settings Software”. Step 2. While inserting the Wingman FGC into the computer, press the buttons on both sides of the converter. Continue pressing until the text in the software window turns black. Step 3.
LED Display Standard Version Lighting Status The converter and the Wired Blue LED Fighting Stick are connected. Permanently on Blue LED Wired Fighting Stick is not Slow blinking connected. (Once every two seconds) Red LED Entering Turbo-Remap Permanently on Settings. Red LED Turbo-Remap button is being pressed.
Connecting to the Device 1. Connects to Console Insert Wingman FGC into the PS5 console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful. 2. Connects to Wired Controller Connect the Wired Fighting Stick to Wingman FGC through the USB port.
Page 9
Release all buttons, then press OPTIONS to save settings. Exit setting mode: Step 4. Press PS Key, the BLUE LED of the Wingman FGC will be permanently on. Cancelling Turbo Function Enter setting mode: Step 1. Press SHARE+PS Key, the...
Page 10
The following instructions are based on the PS4 controller. Enter the setup mode Step 1. Press SHARE+PS Key, the RED LED of the Wingman FGC will be permanently on. Turbo Frequency Setting Step 2. The Up button increases frequency while the Down button decreases it.
Page 11
Release all buttons, then press OPTIONS to save settings. Exit setting mode: Step 5. Press PS Key, the BLUE LED of the Wingman FGC will be permanently on. Cancelling Button Remap Settings Enter setting mode: Step 1. Press OPTIONS+PS Key, the...
Step 2. Press SHARE and OPTION at the same time to clear all Macro settings. Exit Step 3. Exit the Macro setting mode by pressing the PS key button. The light on the Wingman FGC will turn o . https://www.youtube.com/watch?v=OEXEqsLPeNk&t=277s...
Page 13
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14
: (1) L’ appareil ne doit pas produire de brouillage; (2) L’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’ en compromettre le fonctionnement. P/N: Wingman FGC FCC ID: 2ADKM005A IC: 29174-ZPP005A M/N: ZPP005A For the latest user guide and more information, visit our website: www.brookaccessory.com...
Page 37
본체�연결 PS5 / PS4 / PC LED 버튼 LED 버튼 유선�컨트롤러�연결 Fighting Stick * Wingman FGC 한 대당 컨트롤러 장치 한 대씩만 대응됩니다. Wingman FGC 는 공장 규격에 부합하는 호환 부품 대부분을 지원하며, 비정기적인 펌웨어 업데이트를 통해 지원 품목을 확대합니다.
Page 38
펌웨어�업데이트 제품을�처음�사용하시는�경우터보, 키맵핑, 매크로�기능은�비활성화 상태로�설정되어�있습니다.해당�기능을�사용하실�경우 Brook 공식 홈페이지�상단�다운로드�메뉴에서펌웨어�업데이트�파일을�통해�기능을 활성화�할�수�있습니다. https://www.brookaccessory.com/download/PS5/ � 표준판: 터보 / 리맵 / 매크로 기능이 있습니다 기능이 포함되어 있습니다 / 파란색 LED � 대회판: 터보 / 리맵 / 매크로 기능 없음 / 빨간색 LED...
Page 40
표준판 램프 신호 상태 파란색 LED 어댑터와�장치 점등 연결�작업�중 파란색 LED 느리게�깜빡임 유선�장치가�접속되지 (2초에�한�번�깜빡임) 빨간색 LED Turbo-Remap 점등 설정�모드�진입 빨간색 LED Turbo-Remap 깜빡임 기능�버튼�눌림 대회판 램프 신호 상태 빨간색 LED 어댑터와 장치 연결 작업 중 점등 빨간색 LED 유선 장치가 접속되지 깜빡임...
Page 41
버 튼 설 정 대 응 표 X1/X1E2 X360 PS4/PS5 Switch D-Pad (U/D/L/R) Lx / Ly Rx / Ry ╳ ╳ ○ ○ □ □ △ △ MENU START OPTIONS START START SHARE BACK+ View+MENU BACK SELECT /MENU /Create START Xe Key Xe Key PS Key...
Page 42
연 결 및 사 용 1. 게임�본체에�연결하기 Wingman FGC를 PS5 본체의 USB 연결�포트에�연결한�후, 파란색 LED가�느리게�깜빡이면�본체�연결에�성공했다는 의미입니다. 2. 유선�컨트롤러에�연결하기 유선�파이팅�스틱을 Wingman FGC 에 USB로 연결해서�사용할�수�있습니다. Wingman FGC Wired only PS5 / PS4 console PC (X-Input) Wired Fighting Stick https://www.youtube.com/watch?v=ebHUeXe8viU...