Brook Ras1ution2 Manual

Racing
wheel
System Settings
ON
Pro Controller
Controllers
Wired Communication
and Sensors
PS4 PS3
PS5
XSX| S Xbox One Xbox 360
Switch
SWITCH
On Switch, go to System Settings
Controllers and Sensors, and
ON Pro Controller
turn
Wired Communication.
step.1
Connect the Ras1ution 2 converter to the console.
step.2
Connect your racing wheel to USB port 1.
step.3
Press the start button to choose the platform (switch on the left or
right key) and press the start button to save.
Ras1ution 2 has two main modes: steering wheel mode and controller mode.It's
suggested to choose steering wheel mode on each according console at rst.
Some games may not recognize steering wheel mode, you can then choose
controller mode to play.
*Note: There's just controller mode for Switch.
step.4
You can set the force feedback strength (±20 stages)/steering
range (±20 stages)/dead zone (±20 stages)/Language on menu
and press start button to save.
step.5
In force feedback strength, steering range and
deadzone pages, you can press the left/right key to
increase or decrease and press the start button to
save, press down key to resume default setting or
press up key back to the menu.
*Brook supply the Ras1ution app, you can download from App store/Google play to
set and save the mode as you wish (this pro le will save in your mobile, you can
connect it no matter where you are)
*You can connect to PC or using Bluetooth to update the rmware of Ras1ution
(Please check the Bluetooth & rmware versions on the screen.)
For more Details please visit our official website at
www.brookaccessory.com
M/N：ZPP0053
202203V1