Page 1
KAYO USA INC. eA70 Assembly Manual WWW.RIDEKAYO.COM...
Page 2
1. The picture on the left shows the tools required for unpacking & assembling the eA70. Ft lbs. Torque wrench ① Socket extension ② 10mm socket ③ 12mm socket ④ 17mm socket ⑤ 27mm socket ⑥ 12mm wrench ⑦ 12mm-14mm wrench ⑧...
Page 3
Name Quantity Name Quantity A Dust cover N Bolt M8 x 16 B Cable tie ST4.0*8 C Washer 17 x 48 x 3 ST4.2*12 D Key electric lock P Cotter pin 3*20 E Phillips head screwdriver Q Cotter pin 4*28 F Castle Nut M16 x 1.5 x 18 R Cotter pin...
Page 4
10. Lift front end of ATV in center using a jack. 11. Install tie rod end positioned top of spindle. With front raised and secured, install lower Locate Castle nut (G) and thread into tie rod end. shock mount with supplied M10 x 40mm bolt & Always start threads by hand at least 2 full turns.
Page 5
Install dust cover as shown in picture. To access main power shut off, remove Press-in until cover seat in hub grove evenly. seat. turn the main power protection switch to the direction pointed by the arrow. 18.Connect the power plug to the battery. 19.