Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Mount, Dual Monitor, Space Saver Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description LLR03186...
Lorell product to which an accessory and/or component is attached. accessories causing possible injury. ACCESSORY: AN ACCESSORY is the secondary Lorell product which is attached to a primary Lorell product, and may have a component attached or setting on it. MODEL Max Weight Max Weight...
Page 3
Installation Instructions LLR03186 DIMENSIONS INTERFACE MOUNTING PATTERN ROTATION COMPATIBILITY RANGE 100 X 100 75 X 75 10 DOWN DYNAMIC HEIGHT ADJUST RANGE 18.81 5.81 477.8 147.6 DESKTOP THICKNESS RANGE 2.43 61.8 11.0 DIMENSIONS: INCHES [MILLIMETERS]...
Page 4
LLR03186 Installation Instructions LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación...
Installation Instructions LLR03186 TOOLS REQUIRED FOR INSTALLATION 3/16” (included) 1/8” (included) PARTS A (1) [Desk clamp arm] B (8) D (8) C (8) K (1) H (2) M4x10mm M10x5.3x10 M4x20mm 3/16” M4x4mm L (1) J (2) 1/8” #10-32-3/8” E (1)
LLR03186 Installation Instructions Assembly And Installation Grommet Hole Option NOTE: The clamp mounts may be installed directly to grommet Connecting Desk Clamp Arms to Desk holes between 1 1/4” and 2 1/2” in diameter. If grommet Standard Installation hardware (E-G) is used, they can be installed to grommet holes between 3/8”...
Page 7
Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components and accessories attached to the LLR03186 Monitor Arm up to (and including) the display does not Figure 5 exceed 25 lbs (11.34 kg) per display or 50 lbs (22.68 kg) total.
Page 8
LLR03186 Installation Instructions Adjustments For recessed mounting hole installation: • Place four spacers (D) on top of mounting holes Low Profile Adjustment on back of display. (See Figure 9) Adjust inside arm to achieve desired low profile depth. (See •...
Installation Instructions LLR03186 Lift Arm Tension Adjustment Pitch Adjustment Tension may be adjusted with tension adjustment screw Adjust pitch to desired tilt position. (See Figure 13) inside cable management cover and 1/8” hex key (L). (See Adjust pitch tension screw to change the adjustment Figure 15) tension.
LLR03186 Installation Instructions Cable Management Display Removal Security Screw Press insides of cable management covers at both ends to NOTE: In order to prevent display from being easily removed unhinge tabs on either end of cable management cover on from mount using the quick release lever, install upper arm.