Related Manuals for Mirabella International Mirabella Genio
Summary of Contents for Mirabella International Mirabella Genio
- Page 1 I005282 Mirabella Genio 30cm Pixel LED Twin Bar USB powered Please read this manual carefully before using the product and keep it for future reference.
-
Page 2: Product Specification
Product Specification If you don’t have Wi-Fi at home or cannot pair it for some reason but still want to use this light, simply wait for 3 minutes for the light to stop blinking, then manually press C button on Wi-Fi controller to change colour and modes... -
Page 3: Product Installation
Product Installation Please pay attention to HOW you insert the light to the base, incorrect installation will bend the power cord and make the light bar unstable. - Page 4 FAQ section. Install the APP and register Account For the best experience, download the "Mirabella Genio" APP to your smartphone from the App Store or Google Play, The APP icon will be displayed after it’s installed successfully...
- Page 5 ON/OFF button on the Wi-Fi Controller and wait for the light to start blinking RED Open Mirabella genio APP, tap on + , wait for the APP to automatically discovery the smart device , please ensure that you are using the 2.4Ghz Wi-Fi...
- Page 6 ON/OFF button on the Wi-Fi switch controller, until the light starts to blink rapidly (2 blinks per second) Open Mirabella Genio APP, tap on + symbol, add device then Ambient Lighting choose Genio 30cm Bar Light from the list 4.Enter your 2.4Ghz Wi-Fi name and password, (make sure Wi-Fi name...
- Page 7 Wi-Fi controller again and then wait for the light to start blinking slowly (1 blink per every 2 seconds) Open up the Mirabella genio APP, tap on + , add device then choose Genio 30cm bar Light from the Ambient Lighting list Enter your 2.4Ghz Wi-Fi name and password, (make sure the Wi-Fi name...
- Page 8 Note: If you would not see Wi-Fi name beginning with the word SmartLife_XXXX then the device is not slowly blinking, please reset and ensure that it is slowly blinking. Once connected to SmartLife_XXXX, return to the Mirabella Genio APP and it will commence adding device...
- Page 9 A. Go the light settings page (… or pencil looking icon), look for “remove device” Remove it and reset the device and pair it again through the app. Mirabella International Pty Ltd 1 Mirabella Drive Tullamarine VIC. 3043 Australia t: 1800 636 528...
Need help?
Do you have a question about the Mirabella Genio and is the answer not in the manual?
Questions and answers