Condition
Remote control does not operate. ❑
Some digital cable channels are
not being displayed.
Lost password.
How to reset the TV to factory
settings.
Explanation/Solution
Check the polarity of the batteries or replace the batteries.
❑
Point the remote control at the remote control sensor of the TV.
❑
Fluorescent lamps can interfere with your remote control operation; try
turning off the fluorescent lamps.
❑
Keep the remote control sensor area clear from obstacles.
❑
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❑
The digital cable channel may be set to Hidden in the Show/Hide
Channels setting (see page 33).
❑
Select the Parental Lock menu, then enter the following master password:
4357. The master password clears your previous password and allows you to
enter a new password (page 34).
❑
Turn on the TV. While holding down V on the remote control, press
POWER on the TV. Release the V button.
WARNING: Parental Lock password may be required if it has been created.
The reset will clear all of your customized settings.
41