Using The Screen Menu - Sony BRAVIA KDL-26N4000 Operating Instructions Manual

Using the Screen Menu

Wide Mode
Auto Wide
4:3 Default
Vertical Center
Vertical Size
Phase
32
These options allow you to change the proportion of the screen.
Wide Zoom Select to enlarge the picture uniformly.
Normal Select to display 4:3 pictures in original size when the original source
is 4:3.
• Normal is not available when you are watching 1080i or 720p in High-Definition source.
Full Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (standard-definition source). When the original
source is 16:9 (high-definition source), select this mode to display 16:9
picture in original size.
Zoom Select to enlarge the original picture without distorting the aspect ratio.
• If you press of the remote control, you can also select these modes directly.
On Select to have the screen automatically change to the screen mode
based upon program's content. Typically this requires special setup on
DVD equipment's menu. If frequent screen changes are disturbing to
you, select Off.
Off Select to turn off the Auto Wide option.
Choose a screen mode from the Wide Mode option.
Select the default Screen Mode to use for 4:3 sources.
Wide Zoom
Select to enlarge the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible, with minimal distortion.
Normal
Select to display the 4:3 picture in its original size.
Full Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (standard-definition source).
Zoom Select to enlarge the original picture without distorting the aspect ratio.
Off To turn off automatic size for 4:3.
Allows you to move the position of the picture up and down.
Allows you to adjust the vertical size of the picture.
Adjusts to fine tune overall sharpness.
• Phase is disabled when the TV is receiving a different video input than PC.