Sony BRAVIA KDL-22L5000 Additional Information For Using

Wall-mount bracket for kdl-26l5000 / kdl-22l5000 tv models

Hide thumbs Also See for BRAVIA KDL-22L5000:

Download this manual See also: Training Manual

Additional Information for

Using Sony Wall-Mount Bracket (SU-WL100)

Compatible TV models for this Wall-Mount Bracket information:

KDL-26L5000

KDL-22L5000

For product protection and safety reasons, Sony strongly recommends that you use the

Wall-Mount Bracket model designed for your TV and that the wall-mounting of your TV

is performed by Sony dealers or licensed contractors.

To Customers

Please provide your licensed contractor with this installation supplement as well as the instructions

(supplied with the SU-WL00 Wall-Mount Bracket). Read these documents carefully for safety and proper

installation.

To Sony Dealers and Contractors

Provide full attention to safety during the installation, periodic maintenance and examination of this

product.

Sufficient expertise is required in installing this product, especially to determine the strength

of the wall for withstanding the TV's weight. Be sure to entrust the attachment of this product

to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during

the installation. Sony is not liable for any damage or injury caused by mishandling or improper

installation.

For proper installation, follow your wall-mount bracket instructions and the directions below.

Additional Information for Using Sony Wall-Mount Bracket (SU-WL100)

− −

A-DAE-00-12()

Page 1 TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 2 Figures in the above table may differ slightly depending on the installation. CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV’s operating instructions for its weight.
Page 3 Hook locations diagram KDL-6L5000: Install the TV onto the location “a” of the Base Plate. KDL-L5000: Install the TV onto the location “b” of the Base Plate. Additional Information for Using Sony Wall-Mount Bracket (SU-WL100) Screw (+PSW 4 × 12) Mounting Hook −...
Page 4 Connect the AC power cord and cables to the corresponding inputs on the rear of the TV. For details on the cable connection, refer to the Operating Instructions for your TV. Install the TV onto the Base Plate. Additional Information for Using Sony Wall-Mount Bracket (SU-WL100)

Bravia kdl-26l5000 Su-wl100