Honda PILOT 2021 Owner's Manual page 109

Table of Contents

Advertisement

Message
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
• Appears when the
vehicle is moving.
• Appears if you change the gear position to
the vehicle is moving forward, or to
vehicle is reversing.
• Appears when you set the power mode to ON
without fastening the driver's seat belt.
• Appears when you change the gear position after
(
P has been automatically selected with the driver's
door open, the driver's seat belt unfastened, then
the brake pedal is released.
• Appears when you press the
engaged due to low ATF temperature.
• Appears when depressing the accelerator pedal
while the gear position is in
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition
P button is pressed while the
(
R while
(
(
D while the
P button but it is not
(
(
N .
Explanation
• Release your foot off the accelerator pedal, then select
a shift button.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 534
• Depress the brake pedal until this message disappear.
• Remove your foot from the accelerator pedal. When
driving, depress the brake pedal and change the gear
position.
Continued
107

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents