PARTS & DESCRIPTION Component Function On/Off Button Grinding / Mincing start button; One-click Turbo operation Motor unit Converts electricity and powers the Rotor to rotate at high speeds Cup Lid Connects the Motor unit to the Plastic Cup Plastic Cup Used for holding ingredients Rotor Chops, minces and grinds food ingredients as it rotates at high...
Page 4
WARNINGS ATTENTION : Read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. This appliance must be used only for the purpose it was expressly designed;...
Page 5
12.If you are using the appliance for the first time, you should: Clean the Motor unit with a damp cloth. The Motor unit may NOT be immersed in water or other liquids, or rinsed under running water. Wash the Cup Lid, Plastic Cup and Rotor (with Chopping Blade attached) thoroughly with water &...
Page 6
• use the appliance to process very hard ingredients such as meat with attached bones, coffee beans, soybeans, rice, ice cubes or other frozen foods, fruits with hard cores, hard seeds, thick skins or hard shells; • detach the Plastic Cup while the appliance is in operation or if the Power Cable is still attached to the appliance;...
Page 7
Wash the Cup Lid, Plastic Cup, Chopping Blade and utensils immediately after usage to avoid build-up of bacteria. (Warning: Blades are sharp!) Wipe the bottom of the Motor unit where it has come into contact with food ingredients. If smoke is observed coming out of the appliance, switch off the electric mains and unplug the power cable immediately.
HOW TO USE Clean the Motor unit with a damp cloth. The Motor unit may NOT be immersed in water or other liquids, or rinsed under running water. Wash the Cup Lid, Plastic Cup and Rotor (with Chopping Blade attached) thoroughly with water &...
Page 9
Attach the Cup Lid onto the Plastic Cup, and install the Motor unit onto the Cup Lid. Check that the Motor unit is securely fitted to the Cup Lid and the Rotor, through the driving connector, before you start using the appliance. Plug the power cable into the electric mains and switch it on.
HOW TO CLEAN Wipe the bottom of the Motor unit where it has come into contact with food ingredients with a soft wet cloth. The Motor unit may NOT be immersed in water or other liquids, or rinsed under running water. Wash the Cup Lid, Plastic Cup, Chopping Blade and utensils immediately after usage to avoid build-up of bacteria.
PROBLEM SOLVING Fault symptom Cause analysis Troubleshooting After the Motor unit is The Motor unit and Reconnect the Motor unit and installed, the machine Cup Lid are not Cup Lid does not work after connected perfectly pressing the switch The motor is damaged Turn the motor shaft.
• if the appliance has been repaired or modified or changed in any way or by any person not properly authorised SPECIFICATION MODEL VOLTAGE POWER CAPACITY PPCP713 220-240V ~ 50/60Hz 300W 1.5L...
Need help?
Do you have a question about the PPCP713 and is the answer not in the manual?
Questions and answers