Mitsubishi Electric TRANE TPEADA0091AA70A Operation Manual page 4

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
⑫ ⑬ ⑭ ⑮ ⑯
⑥
⑦
⑧
⑨
⑩
Cool
①
⑪
Mode
㉒
▌① Operation mode
Indoor unit operation mode appears here.
▌② Preset temperature
Preset temperature appears here.
▌③ Clock (See the Installation Manual.)
Current time appears here.
▌④ Fan speed
Fan speed setting appears here.
▌⑤ Button function guide
Functions of the corresponding buttons appear here.
▌⑥
Appears when the ON/OFF operation is centrally controlled.
▌⑦
Appears when the operation mode is centrally controlled.
▌⑧
Appears when the preset temperature is centrally controlled.
▌⑨
Appears when the filter reset function is centrally controlled.
▌⑩
Indicates when filter needs maintenance.
▌⑪ Room temperature (See the Installation Manual.)
Current room temperature appears here.
▌⑫
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
4
⑱ ⑲
Fri
83
Room
F
Set temp.
83
F
Temp. Fan
②
⑤
<Basic mode>
③
⑳
Cool
㉑
①
⑰
④
Mode
▌⑬
Appears when the On/Off timer or Auto-off timer function is enabled.
appears when the timer is disabled by the centralized control system.
appears when the HOLD function is enabled.
▌⑭
Appears when the Weekly timer is enabled.
▌⑮
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌⑯
Appears while the outdoor units are operated in the silent mode.
▌⑰
Appears when the built-in thermistor on the remote controller is activated
to monitor the room temperature (⑪).
appears when the thermistor on the indoor unit is activated to monitor
the room temperature.
▌⑱
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
▌⑲
Indicates the vane setting.
(This indication is not available for this model.)
▌⑳
Indicates the louver setting.
(This indication is not available for this model.)
▌㉑
Indicates the ventilation setting.
▌㉒
Appears when the preset temperature range is restricted.
②
Fri
Set temp.
83
F
Temp. Fan
⑤
③
④