Page 1
Weather-proof Mini System require more length, splice the exposed wiring from the insulated cable to your source unit or amplifi er using 18 gauge wire. KICKER recommends protecting the splice with heat shrink tubing. Attach the Rear Badge over the M5x40 Screw.
Page 2
Enclosure Mounting: Remove the M5x16 Screws and Lower Clamp Speaker Orientation: Slightly loosen the M8X20 Screw using a 6mm hex using a 4mm hex key, then position the Upper Clamp along the bar you wish key and the M5x40 Screw using a 4mm hex key. Aim the speaker enclosure to mount the enclosure to.