Sony STR-DG910 Hdmi Control Manual page 2

Using the HDMI
CONTROL function for
'BRAVIA' Theatre Sync
To use 'BRAVIA' Theatre Sync, set the
HDMI CONTROL function as explained
below.
By connecting Sony components that are
compatible with the HDMI CONTROL
function with a HDMI cable (not supplied),
operation is simplified as below:
• One-Touch Play: When you play back a
component such as a DVD/Blu-ray Disc
Player, the receiver and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching TV,
you can select to output the sound from the
TV speaker or the speakers connected to the
receiver.
• System Power Off: When you turn off the
TV, the receiver and connected components
are also turned off simultaneously.
HDMI CONTROL is a mutual control
function standard used by HDMI CEC
(Consumer Electronics Control) for HDMI
(High-Definition Multimedia Interface).
The HDMI CONTROL function
does not work in the following
cases:
• When you connect the receiver to a
component which is not correspond with
Sony's HDMI CONTROL function.
• When you connect the receiver and
components using other than HDMI
connection.
We recommend that you connect the receiver
to products featuring 'BRAVIA' Theatre
Sync.
2
GB
Note
Depending on the connected component, the HDMI
CONTROL function may not work. See the
operating instructions of the component.