Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification sheet is applied to the LCD TV used LD84A
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V~, 50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
4. Module general specification
Item
Display Screen Device
Aspect Ratio
LCD Module
Operating Environment
Storage Environment
Input Voltage
Power Consumption
Module Size
Pixel Pitch
Back Light
Display Colors
Coating
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
32" wide Color Display Module
16:9
32" TFT LCD HD
Temp. : 0~50 deg
Humidity : 20~90%(CMO),10~90%(LGD), 0~95%(Sharp)
Temp. : -20~60 deg(CMO/LGD), -25~60 deg(Sharp)
Humidity : 10~90%(CMO/LGD), 0~95%(Sharp)
100 - 240V~, 50/60Hz
Power on (Green)
CMO(HD)
Typ:110, Max:120
Sharp(HD)
Typ:116.8, Max:153.6
LGD(HD)
Typ:87.3, Max:96.6
CMO(HD)
760(H) x 450(V) x 47.4(D)
Sharp(HD)
760(H) x 450(V) x 50.1(D)
LGD(HD)
760(H) x 450(V) x 48.0(D)
CMO(HD)
0.17025(H) x 0.51075 (V)
Sharp(HD)
0.51075(H) x 0.51075(V)
LGD(HD)
0.17025(H) x 0.51075 (V)
CMO(HD)
16 CCFL
Sharp(HD)
12 CCFL
LGD(HD)
12 EEFL
16.7M
3H, AG
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC: CE, IEC
Model
32LG2000-ZA
EU(PAL market)
- 6 -
Market
Appliance
Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
Remark
LCD
LG2000/3000(HD)
MAKER : 32"- CMO, LGD, Shap
LGE SPEC
LCD(Module) + Backlight(Lamp)
LGE Internal Use Only
Advertisement
