Faq - Philips EasyAir SNS212 MC Design-In Manual

FAQ

Can you use a wall dimmer with EasyAir SNS212 MC?
How does EasyAir SNS212 MC compare to Philips ActiLume?
Is EasyAir SNS212 MC a DALI sensor?
Can I use EasyAir SNS212 MC outside a luminaire?
Can I use one sensor with multiple luminaires?
19
Design-in Guide - EasyAir SNS212 MC
SNS212 MC can be used with a wireless wall dimmer,
e.g., Zigbee green power switch. For list of supported
switches, please visit our website
Occupancy sensing and daylight harvesting are similar.
Form factors are also similar, with the face of the sensor
outside the luminaire having the same size. The portion of
EasyAir SNS212 MC within the luminaire is slightly deeper
and longer to accommodate added functionality. EasyAir
SNS212 MC includes granular dimming together with
energy reporting and works with Philips Xitanium SR LED
drivers to eliminate the cost and complexity of a separate
power pack.
EasyAir SNS212 MC works with Philips Xitanium SR
LED drivers, which have inbuilt power supply. It
cannot be used with DALI drivers and therefore,
EasyAir SNS212 MC is not a DALI sensor.
An accessory option called CMP/w is available to
enable ceiling mounting. Wiring to the driver must be
kept less than 2m.
Yes, and the ceiling mount option is likely utilized in this
use case (called 1:N operation as opposed to 1:1). It
usually means turning off the SR power supplies in all but
two of the SR drivers. See EasyAir SNS212 MC with
multiple SR drivers 1:N application section.
April 2023