Mechanical Design-In; Wire Strip Length; Wire Insertion; Wire Separation From The Connector - Philips EasyAir SNS212 MC Design-In Manual

Mechanical design-in

Wire strip length

Strip length
8.0 ± 0.5 mm
Conductor
[ Conductor: Bare Copper / Strand wire ]

Wire insertion

5°~7° Angle Max
Inserting solid conductors via push-in terminal
[ Inserting solid conductors via push-in terminal ]

Wire separation from the connector

11
Design-in Guide - EasyAir SNS212 MC
Insulation
1. Push

Wiring Information

Applicable wires
Conductor size: solid
Conductor size: fine-stranded
Conductor size: fine-stranded
Conductor size: fine-stranded
AWG
Strip length
Note: Stranded wires without ferrule should be soldered
0.2 - 0.75 mm
2
0.2 - 0.75 mm 2
0.25 - 0.34 mm 2
(with insulated formule)
0.25 - 0.34 mm
2
(with insulated formule)
24 - 18
7 - 9 mm / 0.28 - 0.35 in
April 2023