Hisense 55U8HAU Quick Setup Manual page 19

USB
Connect the USB1.1 and USB2.0 devices such as hard drives, USB sticks and
digital cameras for browsing photos, listening to music and watching movies.
TV JACK
USB
DC 5V 1A(MAX) DC 5V
NOTES
When connecting a hard disk or a USB hub, always connect the mains adapter of
the connected device to the power supply. If a USB 1.1 or USB2.0 device requires
more than 500mA or 5V, the USB device may not be supported. Max supported
current for USB 3.0 device is 1A (only for some models). Exceeding the max
supported current may result in damage or data loss.
Certain digital cameras may not be compatible with the TV.
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
· We recommend you to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don't have to enter them manually. Most home networks already have DHCP.
TV JACK
LAN
LAN Cable
Making Connections
USB
0.5A(MAX)
IP Sharer (Router)
(with DHCP server)
(ADSL / VDSL / Cable TV)
LAN Cable
10
External Modem
Modem Cable