Panasonic MC-CG710 Series Operating Instructions Manual page 8

Floor Nozzle
■ Wood Flooring /
To avoid scratching the floor surface, lightly slide the Floor
Nozzle over the flooring with the grain of the wood.
NOTE / /
To prevent damaging the floor surface, do not vacuum by
moving the Floor Nozzle side to side.
■ Carpet / /
1. First run the Floor Nozzle backwards and forwards over the
carpet in one direction, then repeat at an angle of 90 degrees.
2. Finally, vacuum the corners of the room.
.
NOTE / /
When you vacuum new carpet, the Cloth Dust Bag will quickly
fill up with loose fibers from the carpet.
This will gradually decrease with subsequent cleanings.
Hose Assembly
Hose
Curved Wand
/
.
• Insert the Curved Wand and Hose Connection Wand into the Hose Supporter at
each end of the Hose until the Projection clicks into the hole of the attachment.
Hose Supporter
Projection Hole
Crevice Nozzle
• For cleaning gaps between furniture, corners of sofas,
gaps and etc. in flooring.
• Connect the Crevice Nozzle to the end of the Extension
Wand or Curved Wand.
Curved Wand
To decrease the suction power
• Adjust the regulator backward to operate on carpet or
curtain.
Curved Wand
Suction Regulator
Hose Connection Pipe
8
•
•
•
•
•
•
•
•