General Cleaning And Maintenance Work; Changing The Blade; Storage; Waste Disposal And Environmental Protection - Grizzly ARM 4034 Lion Set Instructions For Use Manual

GB
Wear gloves when handling the
blade
Switch off the device, pull the con-
tact chip (
blades to come to a stop. There is
a risk of personal injury.
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
General Cleaning and
Maintenance Work
Do not hose down the lawnmow-
er with water. Electric shock
hazard
• Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
• After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
• Oil the wheels from time to time.
• Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts, bolts and screws are sitting
firmly.
• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary
30
17) and wait for the

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced
1. Turn the equipment over.
2. Use sturdy gloves and hold the blade
firmly (22). Turn the blade screw (21)
anticlockwise off of the motor spindle
using a screwdriver.
3. Install the new blade (22) in the re-
verse order. Ensure that the blade (22)
is positioned correctly and the screw
(21) tightened firmly.

Storage

Release the upper and lower quick-re-
lease levers (2 + 5) and fold the bow-type
handle (1) and lower bar (4) together so
that the device takes up less space. En-
sure that the cables are not jammed in the
process.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and
environmental protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.