Table of Contents
Advertisement
To ensure that your phone maintains waterproof
capability, the following precautions must be observed.
+ Make sure the battery cover is properly sealed
by squeezing around the edges of the cover. The
charger/ accessory jack and headset jack ports do
not have covers because they are waterproof.
+ Do not spray or immerse your phone in liquids other
than fresh water or tap water.
+ Do not expose your phone to water heated in
excess of 104° F (40° C), or to liquids other than
water, such as detergent, beverages, or chlorinated
or treated water. Should your phone be accidentally
exposed to other liquids, rinse the phone gently in
clean fresh water.
+ The touch panel and touch keys will not operate
when the phone is wet.
+ Your phone is inoperable under water and should be
dried as quickly as possible when wet.
+ Do not use the charger/accessory jack for charging,
data transmission, etc. until the phone is
completely dry.
If your phone gets wet:
Water lodged in the headset jack may cause the
phone to falsely detect an inserted headset (in which
case the loudspeaker and/or earpiece audio will be
disabled) until the water is removed. Water in the
microphone port may affect outbound audio quality.
These are temporary conditions and will subside once
the phone is dry.
1.
2.
3.
Important Safety Information
Do not open the battery door as this may
allow water to get inside the sealed portion of
the phone.
Wipe the phone surfaces with a dry clean cloth.
Water in the phone's open ports may affect
sound quality and should be removed with
puffs of air directly into the ports. Phone audio
may not operate properly until ports are dry.
Apply a dry clean cloth to the open areas and
crevices to remove the moisture left on the
phone: microphones; speakers; power button;
volume button; headset jack; and charger/
accessory jack.
5
Advertisement
Table of Contents
