Interface Cables - Sony VPH-G70Q Brochure & Specs

Multiscan projector with optional accessories
Hide thumbs Also See for VPH-G70Q:
Table of Contents

Advertisement

Interface Cables are designed to
connect IFB Series Interface
Boards with various signal sources.
Using a SIC cable, a signal can be
simultaneously connected to a
local monitor as well as to the
projector or signal interface
switcher.
SIC-20A/20B/20C
• Analog RGB
• D-sub 9-pin
D-sub 15-pin (female)
(female)
D-sub 15-pin (male)
• Length: overall 2m (6.6ft), branch 0.2m (0.7ft)
SIC-30
• Digital RGB input
• D-sub 9-pin
D-sub 9-pin (female)
(female)
D-sub 9-pin (male)
• Length: overall 2m (6.6ft), branch 0.2m (0.7ft)
SMF-400
• HD D-sub 15-pin
5BNC
• Length: overall 2m (6.6ft)
SIGNAL INTERFACE SWITCHER
PC-1271/1271M
• Provides eight slots for optional interface
boards. By using two PC-1271/1271M
Switchers, a maximum of 16 inputs can be
connected simultaneously.
• Remote control capability with the
RM-PJ1000 and RM-PJM800. The switcher
can also be controlled with a custom-made
remote control unit via the REMOTE 2
(D-sub 25-pin).
• The switcher can be connected to the
projector using a SIC-M multi-cable* (50m)
via REMOTE 1. Incorporates a cable length
compensation switch to maintain the RGB
bandwidth of 70MHz when using the
multi-cable. A 150MHz RGB bandwidth is
guaranteed for Monitor OUT.
• When one of the input selection switchers
is selected, the front panel of the chosen
interface board automatically illuminates.
• When power is turned on, the PC-1271/
1271M reconnects the channel that was in

INTERFACE CABLES

RCC-5G/10G/30G
• 9-pin remote cable for RS-422A
• D-sub 9-pin
D-sub 9-pin
• Length: 5, 10 and 30 meters
SIC-21
• Analog RGB
• D-sub 9-pin
D-sub 9-pin (female)
(female)
D-sub 9-pin (male)
• Length: overall 2m (6.6ft), branch 0.2m (0.7ft)
2
SIC-M*
• Multi-cable 14-pin
14-pin
(female)
(male)
• Length: 1, 5, 15, 25 and 50 meters
SMF-401
• HD D-sub 15-pin
HD D-sub 15-pin
• Length: overall 2m (6.6ft)
use immediately prior to the power being
turned off.
• Mountable in an EIA 19-inch rack with the
supplied rack mount kit.
1
*
Will soon be available.
*
2
Some items are not available in some areas. For further details, please consult your nearest Sony office.
SIC-10
• 5 x BNC
5 x BNC
(R, G, B, HD/HV, VD)
(R, G, B, HD/HV, VD)
• Length: overall 10m (32.8ft)
SIC-22
• Analog RGB with digital sync
• D-sub 9-pin
D-sub 15-pin
(female)
High Density (female)
D-sub 15-pin
High Density (male)
• Length: overall 2m (6.6ft), branch 0.2m (0.7ft)
OTHER
ADP-10
(Signal adapter, HD D-sub 15-pin to D-sub 9-pin
for SIC cable)
ADP-20
(Signal adapter, Macintosh to VGA)
VPS-100FH
(100-inch flat screen)
VPS-120FH
(120-inch flat screen)
PSS-70
(Projector suspension support)
PSS-10
(Projector suspension support)
SIGNAL INTERFACE UNIT
2
IFU-1271/1271M*
• Distributes an input signal from the IFB board
to two outputs with 100MHz bandwidth.
• The IFU-1271/1271M converts signals from a
digital signal level to an analog signal level
(TTL to 0.7Vp-p) for output.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vph-g70qm

Table of Contents