Handling Devices That Are Sensitive To Electrostatic Discharge; Grounding Requirements - Lenovo Flex 2 Pro-15/Edge 15 Hardware Maintenance Manual

Lenovo Flex 2 Pro-15/Edge 15 Hardware Maintenance Manual

Handling devices that are sensitive to electrostatic discharge

Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD damage
by equalizing the charge so that the machine, the part, the work mat, and the
person handling the part are all at the same charge.
Notes:
1. Use product‐specific ESD procedures when they exceed the
2. Make sure that the ESD protective devices you use have been certified
When handling ESD‐sensitive parts:
• Keep the parts in protective packages until they are inserted into the product.
• Avoid contact with other people.
• Wear a grounded wrist strap against your skin to eliminate static on your
body.
• Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static‐free work
surface. The mat is especially useful when handling ESD‐sensitive devices.
• Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Notes:
The use of a grounding system to guard against ESD damage is desirable but
not necessary.
– Attach the ESD ground clip to any frame ground, ground braid, or green‐
– When working on a double‐insulated or battery‐operated system, use an
– Use the round ground prong of the ac plug on ac‐operated computers.

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
6
All manuals and user guides at all-guides.com
requirements noted here.
(ISO 9000) as fully effective.
wire ground.
ESD common ground or reference point. You can use coax or connector‐
outside shells on these systems.