Advertisement
Complete system setup and configuration | Stage 4
Power on the shelves and set shelf IDs:
1
Note: For DM240N drive shelves, shelf IDs are pre-set to 00 and 01.
If you want to change the shelf IDs, use the straightened end of a
paperclip, or narrow tipped ball point pen to access the shelf
ID button behind the faceplate.
1.
Plug the power cords into the shelf power supplies,
and then connect them to power sources on different circuits.
Note: DM240N shelves have no power switch and will begin to boot.
2. If you need to change the shelf IDs, see Changing a DM240N drive shelf ID for detailed instructions:
https://thinksystem.lenovofiles.com/storage/help/topic/dm240n-nvme-shelfid/M_762128BB-169D-4EFA-AA38-FEF4F2A31488_.pdf
Connect the power cables to the
2
controllers and to the power source.
The system powers on when plugged into the power source.
Complete initial cluster setup with network discovery:
3
Connect your laptop to the management switch and access the network computers and devices.
Laptop
Use Storage Manager Guided Setup to configure your cluster.
4
Complete setup:
5
1. Go to Lenovo Service Connect (https://commercial.lenovo.com) and login with your corporate account.
2. After you have completed the initial configuration, go to the ONTAP Software documentation for information about configuring
additional features in ONTAP:
https://thinksystem.lenovofiles.com/storage/help/topic/ontap_software/overview.html
HELPFUL LINKS
To power source
a
Open File Explorer
Management Switch
b
Click Network in the left pane.
Then right click and select Refresh.
ThinkSystem Storage Documentation
•
https://thinksystem.lenovofiles.com/storage/help/index.jsp
Lenovo Data Center Support Web site (worldwide)
•
https://datacentersupport.lenovo.com/
Lenovo Data Center Support Web site (China)
•
https://support.lenovo.com.cn/EsWeb/
End cap
Faceplate
1
2
3
1
2
3
c
Double-click either ONTAP icon.
Note:
Accept any certificates displayed on your screen.
Shelf ID button access
Shelf ID number
4
5
4
5
Advertisement
