Advertisement
Settings > General
set DP OuT for Multi stream Transport.
on
off
Dp ouT
•
Make sure that the graphics card supports the MsT function.
•
Because of the bandwidth limit of DisplayPort Ver. 1.2, up to 2560 x 1440 @ 75 Hz monitor can be connected and used.
•
If the DP OuT is enabled, HDr is not supported.
•
If the DP OuT is enabled, Freesync is not supported for all connected monitors.
HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.
on
off
HDmI Compatibility mode
•
If the connected device does not support HDmI Compatibility mode, the screen or sound may not work properly.
•
some older graphics cards do not support HDMI 2.0,but you can select HDMI 2.0 resolution in the control panel of window.
•
This may cause the screen to appear abnormally.
This feature lets you set the sound generated from Buzzer when your monitor powers on.
buzzer
on
off
This feature disables the configuration and adjustment of menus.
on
off
oSD Lock
•
all features are disabled except Brightness, Contrast, Volume, Input List, aspect ratio, OsD Lock, auto Input switch and Information.
The following display information will be shown; Total power on Time, resolution.
Information
Enables DP OuT(MsT) function
Disables DP OuT(MsT) function.
NoTE
Enables HDmI Compatibility mode.
Disables HDmI Compatibility mode.
NoTE
Enables your monitor's buzzer.
Disables your monitor's buzzer.
Enables oSD Lock.
Disables oSD Lock.
NoTE
Description
23
Advertisement
