Advertisement
Advertisement
Table of Contents
Related Manuals for TRAMEX MEX5
Summary of Contents for TRAMEX MEX5
- Page 1 MOISTURE ENCOUNTER MEX5 - MEX5 - QUICK START GUIDE www.tramexmeters.com...
- Page 2 Hold freezes reading to facilitate ease of recording readings. When the Moisture Encounter MEX5 is in HOLD mode, ‘II’ is visible on the top left of the display. Press for Bluetooth® connectivity to your Tramex Meters App.
- Page 3 NON DESTRUCTIVE MODE Method: Place your MEX5 directly on the material being tested ensuring the base electrodes are fully in contact with the material for instant readings on the digital screen. The Low/Med/High LEDs help indicate low, medium and high moisture values.
- Page 4 PIN PROBE MODE This mode is activated automatically by plugging one of the optional Pin Probe Electrodes into the socket at the top of the instrument. Wood %MC measurements: range from approx. 6.5% to approx. 50%MC. Low/Medium/High LEDs: Green 0 -13.9% / Yellow 14 - 17.9% / Red 18 - 50 %.
- Page 5 ADVANCED FEATURES In Settings/Advanced features, turn on/off the following advanced options: Baseline Ref: In NDT mode, place the MEX5 on a known dry area and record the reading as a baseline reading by pressing Subsequent NDT readings will be compared to...
- Page 6 Pin Probe mode. CALIBRATION & WARRANTY Annual calibrations are recommended. A Calibration Check Box for the MEX5 can be purchased for more regular checks. The pin probe calibration can be automatically checked in the Pin Probe menu.
Need help?
Do you have a question about the MEX5 and is the answer not in the manual?
Questions and answers