Editing Text - Zte VFD 512 User Manual

NOTE:
Some default input methods may not be disabled.
Change input methods
1. When you use the onscreen keyboard to enter text, touch
the icon
2. Select the input method you need.
NOTE:
The icon
method is installed and enabled.
Input method settings
Choose the input method settings by touching
Settings > Languages & input > Virtual keyboard from the
home screen. You can set the current input method and
choose the settings for input methods.

Editing text


Move the insertion point: Touch where you want to type.
The cursor blinks in the new position, and a tab appears
below it. Drag the tab to move the cursor.

Select text: Touch and hold or double-tap within the text.
The nearest word highlights, with a tab at each end of the
selection. Drag the tabs to change the selection.

Cut or copy: Select the text you want to manipulate. Then
touch CUT or COPY to cut or copy the text to the
clipboard.

Replace text with the clipboard text: Select the text you
want to replace. Then touch PASTE.

Insert clipboard text to the text field: Touch and hold
the tab below the cursor and then select PASTE.
at the bottom right corner of the screen.
appears only when more than one input
20
>